Description
DC-E20 RTV-2 Silicone Potting Component is a newly silicone rubber material of sealing compounds.
It cures with no heat, no corrosion and very low shrinkage. It can be applied to the sealing and pouring of various electronic components, and then forming insulation system.
Application
DC-E20 RTV-2 Silicone Potting Component is suitable for bonded seal of electronic components, power module and control module, which requires waterproof and insulation. It can be broadly used for LED screen, Wind Power Generator, PCB substrate, etc.
Operation instructions
1, Pls put part A and part B in separate container and stir evenly before mixing the two part together.
2, Weight Ratio: part A: part B = 1:1
3, Deaeration the mixture under 0.08 MPa for 3 minutes.
4, The temperature influences the curing time: When in too low temperature, we suggest customers appropriately heat the mixture to accelerate vulcanization.
Warm tips :
1.The following material may hinder the curing of the product, So pls apply after summary experiment. When necessary, pls clean the application areas.
2. Should be sealed storage.The mixture should be used up at once, avoid causing waste.
3. Silicone belongs to non-dangerous goods, but keep away from mouth and eyes.
4. When it gets stratified after a period of storage, Please mix 9301 evenly before using, it does not affect the performance.
Package
20KG/drum vacuum packing for part A + 20KG/drum vacuum packing for part B
200KG/drum packing for part A +200KG/drum packing for part B
Shelf life
1. Eighteen(18) months from date of shipment when stored at 25C in original unopened packages.
2. This kind of product is non-dangerous product, it can be transported as general chemicals.
3. Products exceed the storage life should be confirmed normal before using.
About our comapny:
Shenzhen Zhihua Chemical Co.,Ltd.(DC SILICONE) was established in 2008,is a science and technology Company which is concentrating on production, R&D, and sales of Chemical products, especially silicone rubber. We are praised as the leading professional manufacturer of Mould Making Silicone Rubber, Addition Silicone Rubber ,Life Casting Silicone Rubber, Electronic Potting Compound, Pad Printing Silicone Rubber, and so on. There has two main Series of best selling silicone rubber in our company. The DC-A Series Addition cure silicone rubber and The DC- C Series Condensation cure silicone rubber.
Why choose us？
1.Attractive price to help you save cost
2.High quality with stable performance.
3.Free technical support and sample test to check the quality.
4.More than 10 years experience of silicone rubber producing.
5.Relate products purchasing assistance
6.China visiting reception
7.Factory visiting Reception
8.New market developing
9.New products research and development
10.Engineers Site Instruction
11.Hardness can be customized according to your requirement
12.Color and package could be customized
Contact: Kirin Shi
Phone：8613924605213
E-mail:kirin@dcsilicone.com
Skype:13632784323
